Acrodisc® PTFE Membrane - Consumable

PLUS

제품소개

Consumable

[Filter] Acrodisc® PTFE Membrane

관리자 2021-10-26 16:31:03

0 0

Exceptional chemical and temperature compatibility

Ideal for filtration of gas and/or organic solvents.
Prevent spurious peaks on chromatograms and get accurate experimental results. HPLC certified for low levels of UV-absorbing extractables.
Prevent "air bubble" lock in sample vials with 13 mm minispike outlet.
4 mm device offers the lowest sample hold-up (< 10 µL) and is useful for samples up to 2 mL in volume.

Ultimate in chemical compatibility for filtering harsh chemicals that destroy other membrane materials.
The Acrodisc PSF GxF syringe filter provides two to four times the throughput of standard prefilter devices.
Moisture barrier for venting applications.
Acrodisc PSF syringe filter is available in robotic-compatible AutoPack packaging for Caliper* ** Prelude* , TPWII and Multi-Dose* systems and Sotax* dissolution systems.

** Caliper Life Sciences was previously Zymark Corporation

Acrodisc Syringe Filters with PTFE Membrane

Materials of Construction
Filter Media: Hydrophobic PTFE membrane on a polypropylene support
Housing: Polypropylene
GxF Prefilter: Binder-free borosilicate glass

Pore Size
0.2, 0.45 µm

Effective Filtration Area
4 mm: 0.3 cm²
13 mm: 1.0 cm²
25 mm PSF: 3.9 cm²

Sample Volume
4 mm: < 2 mL
13 mm: < 10 mL
25 mm PSF: < 150 mL

Inlet/Outlet Connections
4, 13, and 25 mm PSF: Female luer lock inlet, male slip luer outlet
13 mm: Available with minispike outlet

Typical Hold-up Volume
(with air purge)
44 mm: < 10 µL
13 mm (minispike): < 14 µL
13 mm (male luer): < 30 µL
25 mm PSF: < 150 µL

Typical Liquid Flow Rate (MeOH)
mL/min at 1.0 bar (100 kPa, 15 psi)
25 mm PSF, 0.2 µm: 245
25 mm PSF, 0.45 µm: 510
25 mm PSF, GxF/0.45 µm: 395

Maximum Operating Temperature
100 °C (212 °F)

Maximum Operating Pressure
4 mm: 5.2 bar (520 kPa, 75 psi)
13 mm: 6.9 bar (690 kPa,100 psi)
25 mm PSF: 4.1 bar (410 kPa, 60 psi)
at 21 - 24 ºC (70 - 75 ºF) and 2.1 bar (210 kPa, 30 psi) at 100 ºC (212 ºF)

Sterilization
Provided non-sterile; if desired, autoclave at 121- 123 °C (250 - 253 °F) at 1.0 bar (100 kPa, 15 psi) for a maximum of 15 min.

TF (PTFE) Membrane Disc Filters
Filter Media
Hydrophobic PTFE on a polypropylene support

Pore Size
0.2, 0.45, and 1 µm

Typical Air Flow Rate
L/min/cm² at 0.7 bar (70 kPa, 10 psi)
0.2 µm: 2
0.45 µm: 3
1 µm: 7

Maximum Operating Temperature
100 °C (212 °F)

Minimum Bubble Point - IPA
0.2 µm: 1.0 bar (100 kPa, 15 psi)
0.45 µm: 0.4 bar (40 kPa, 6 psi)
1 µm: 0.1 bar (10 kPa, 2 psi)

Water Breakthrough
0.2 µm: 2.8 bar (280 kPa, 40 psi)
0.45 µm: 1.1 bar (110 kPa, 16 psi)
1 µm: 1.0 bar (100 kPa, 15 psi)

Acrodisc Syringe Filter with PTFE Membrane, 4 mm
Part Number	Description	Pkg
4472	0.45 µm	250/pkg 750/cs
Acrodisc Syringe Filters with PTFE Membrane, 13 mm, Minispike
4552	0.2 µm, minispike outlet	100/pkg 300/cs
4553	0.45 µm, minispike outlet	100/pkg 300/cs
4555	0.45 µm, minispike outlet	1000/pkg
Acrodisc Syringe Filters with PTFE Membrane, 13 mm
4423	0.2 µm, male slip luer outlet	100/pkg 300/cs
4542	0.2 µm, male slip luer outlet	1000/pkg
4422	0.45 µm, male slip luer outlet	100/pkg 300/cs
4543	0.45 µm, male slip luer outlet	1000/pkg
Acrodisc PSF Syringe Filters with PTFE Membrane, 25 mm
AP-4520	0.2 µm, AutoPack tubes	25/pkg 200/cs
AP-4225	0.2 µm	50/pkg 200/cs
AP-4521	0.2 µm	1000/pkg
AP-4518	0.45 µm, AutoPack tubes	25/pkg 200/cs
AP-4219	0.45 µm	50/pkg 200/cs
AP-4501	0.45 µm	1000/pkg
Acrodisc PSF GxF Syringe Filters with PTFE Membrane, 25 mm
AP-4301	GxF/0.45 µm, AutoPack tubes	25/pkg 200/cs
AP-4303	GxF/0.45 µm	50/pkg 200/cs
AP-4302	GxF/0.45 µm	1000/pkg
TF (PTFE) Membrane Disc Filters, 0.2 µm
66141	13 mm	100/pkg
66142	25 mm	100/pkg
66143	47 mm	100/pkg
66630	50 mm	100/pkg
TF (PTFE) Membrane Disc Filters, 0.45 µm
66147	13 mm	100/pkg
66148	25 mm	100/pkg
66149	47 mm	100/pkg
66631	50 mm	100/pkg
TF (PTFE) Membrane Disc Filters, 1 µm
66153	13 mm	100/pkg
66154	25 mm	100/pkg
66159	37 mm	100/pkg
66155	47 mm	100/pkg