Acrodisc® Glass Fiber - Consumable

PLUS

제품소개

Consumable

[Filter] Acrodisc® Glass Fiber

관리자 2021-10-26 16:35:20

0 2

Maximize throughputs for hard-to-filter samples

Available with single layer glass fiber or with a multi-layered glass fiber prefilter over glass fiber media.
The GxF multi-layered prefilter provides two to four times the throughput of standard glass fiber prefilter devices, allowing for quick and easy filtration of your most difficult-to-filter samples.
Reduce clogging. Use alone or in series with final membrane filter to increase flow rate and throughput.
Ensure broad chemical compatibility with polypropylene housing.
For extremely heavy particulate loads, use the larger 37 mm size.
HPLC certified for low levels of UV-absorbing extractables.

For high throughput prefiltration of particulate-laden samples.
Can be used alone or in series with another Acrodisc syringe filter.
25 mm Acrodisc PSF syringe filter is available in robotic-compatible AutoPack^TM packaging for Caliper** Prelude*, TPWII, and Multi-Dose* systems, and Sotax dissolution systems.

**Caliper Life Sciences was previously Zymark Corporation.

Materials of Construction
Filter Media: Borosilicate glass fiber
Housing: Polypropylene

Pore Size
40 - 1 µm

Effective Filtration Area
3.9 cm²

Sample Volume
<150 mL

Inlet/Outlet Connections
Female Luer-Lok* inlet, standard male slip luer outlet

Typical Hold-up Volume
(with air purge)
< 125 µL

Maximum Operating Temperature
82 °C (180 °F)

Maximum Operating Pressure
4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF) and 2.1 bar (210 kPa, 30 psi) at 82 ºC (180 ºF)

Typical Water Flow Rate
650 mL/min at 1.0 bar (100 kPa, 15 psi)