Consumable
| ◎ 사 양 - Polycap AS |
| 하우징 | Polypropylene |
| 환기구 | On inlet |
| 전처리 필터 | Glass microfiber double laminated with polyolefin monofilament non-woven |
| 멤브레인 | Nylon |
| 서포트 시스템 | Polypropylene |
| 실링 | Heat-fused |
| 최대 압력 | 4.1 bar (60 psi) |
| Endotoxin level | L LAL tested, ≤ 0.5 EU/ml |
| 생물학안정성 | Materials pass USP Class VI |
| 멸균 | Certain filter devices have been sterilized. * Capsules may be autoclaved at 121°C for 20 minutes (maximum 132°C). However, an integrity test should be performed after autoclaving. Filling bell is not autoaclavable but is detachable (*sterile and nonsterile options offered) |
| 여과 면적 | 36 mm capsule: 400 cm2 (62 in2) 75 mm capsule: 820 cm2 (127 in2) 150 mm capsule: 1650 cm2 (256 in2) |
| IPA 버블 포인트 | 0.2 µm membrane: > 1.1 bar (16 psi) 0.45 µm membrane: > 0.69 bar (10 psi) 1.0 µm membrane: > 0.14 bar (3 psi) |
| *SSB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing *1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing *MNPT - Male national pipe thread *FNPT - Female national pipe thread *HB - Hose barb |
| ◎ Ordering Information - Polycap AS |
| Catalog Number | Description |
| 6708-3602 | Polycap AS 36, sterile, 0.2 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6705-3602 | Polycap AS 36, sterile, 0.2 µm, with SB inlet and outlet, 1/pk |
| 6709-3602 | Polycap AS 36, sterile, 0.2 µm, with MNPT inlet and SB outlet, 1/pk |
| 2606T | Polycap AS 36, 0.2 µm, FNPT inlet and outlet, 5/pk |
| 2606NS | Polycap AS 36, 0.2 µm, with SB inlet and outlet, 5/pk |
| 6708-3604 | Polycap AS 36, sterile, 0.45 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6705-3604 | Polycap AS 36, sterile, 0.45 µm, with SB inlet and outlet, 1/pk |
| 2607NS | Polycap AS 36, 0.45 µm, with SB inlet and outlet, 5/pk |
| 6705-3610 | Polycap AS 36, sterile, 1.0 µm, with SB inlet and outlet, 1/pk |
| 2608NS | Polycap AS 36, 1.0 µm, with SB inlet and outlet, 5/pk |
| 6706-3602 | Polycap AS 36, sterile, 0.2 µm, with SB inlet and outlet plus filling bell, 1/pk |
| 6709-7502 | Polycap AS 75, sterile, 0.2 µm with MNPT inlet and SB outlet, 1/pk |
| 6708-7502 | Polycap AS 75, sterile, 0.2 µm with 1/2 SB inlet and outlet, 1/pk |
| 6705-7502 | Polycap AS 75, sterile, 0.2 µm, with SB inlet and outlet, 1/pk |
| 2706T | Polycap AS 75, 0.2 µm, with FNPT inlet and outlet, 5/pk |
| 6705-7504 | Polycap AS 75, sterile, 0.45 µm, with SB inlet and outlet, 1/pk |
| 6708-7504 | Polycap AS 75, sterile, 0.45 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6709-7504 | Polycap AS 75, sterile, 0.2 µm, with MNPT inlet and SB outlet, 1/pk |
| 2707NS | Polycap AS 75, 0.45 µm, with SB inlet and outlet, 5/pk |
| 6705-7510 | Polycap AS 75, sterile, 1.0 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6706-7502 | Polycap AS 75, sterile, 0.2 µm, with SB inlet and outlet plus filling bell, 1/pk |
| 2806T | Polycap AS 150, 0.2 µm, with FNPT inlet and outlet 5/pk |
| 2806 | Polycap AS 150, sterile, 0.2 µm, with 1/2 HB inlet and outlet, 5/pk |
| 2805 | Polycap AS 150, sterile, 0.2 µm, with 1 11/2 sanitary inlet and outlet, 5/pk |
| 2807 | Polycap AS 150, sterile, 0.45 µm, with 1/2 SB inlet and 1/2 HB outlet, 5/pk |
Filter
Filter
Filter
Filter
Filter
Filter
Filter
Filter
Filter