제품소개

Consumable

[Filter Holder] Pressure filtration devices
관리자 2021-10-26 17:05:54
0 3

24.jpg

 

Filtration of liquids and gases is possible, including sterile filtration of serums or the clear filtration of media that are difficult to filter, especially those that are highly viscous. Membranes, paper or glass fiber filter discs can be used. Cleaning and changing of filters is completed in a few steps.
All units are equipped with pressure resistant filter supports. High quality silicone or PTFE O-rings seal the systems. Please ensure you only use intact seals for safety reasons. PTFE versions are available in addition to stainless steel devices, for use with corrosive media.
Applications
  • Clear filtration of liquids that are difficult to filter and sterile filtration of liquids and gases. For small volumes: MD 050
  • Inline sterilization of biological liquids, ophthalmics, etc.: MD 142/6
  • Inline filtration of corrosive liquids which must not come into contact with metals: MD 142/7 or with infusion cylinder MD 142/7/3


 

Technical Information - Pressure filtration devices

Series Material Seals Maximum
pressure*
(bar)		 Maximum
temperature
resistance (°C)		 Filter
diameter
(mm)		 Prefilter
diameter
(mm)
MD 050 Stainless steel Silcone/PTFE 10/4 200 50 43
MD 142/5 Stainless steel Silicone/PTFE 10/4 200 142 134
MD 142/6 Stainless steel Silicone/PTFE 10/4 200 142 134
MD 142/7 PTFE PTFE 3.5 200 142 134

 

 

Ordering Information - Pressure filtration devices

Catalog Number Description
Pressure filtration devices
Stainless steel
10450450 MD 050/4, 200 ml, 230 x 70 mm, with rapid seal
10451410 MD 142/5, without infusion cylinder, 100 x 180 mm
10451610 MD 142/5/3, 2200 ml, 545 x 200 mm
10452600 MD 142/6/3 (GMP), 2200 ml, 570 x 220 mm
PTFE
10451700 MD 142/7, without infusion cylinder, 180 x 200 mm
10451710 MD 142/7/3, 1500 ml, 470 x 200 mm
Pressure filtration devices - accessories - inlet/outlet connections
For stainless steel pressure filtration devices of the MD 050 and MD 142/5 series*
10453000 MD 050/0/11, connection: R 3/8", for SV 004, 1/pk
10453001 MD 050/0/12, connection: rapid seal coupling, for SV 003 b and SV 003 c, 1/pk
10453002 MD 050/0/13, connection: olive external dia. 13 to 15 mm, for pressure hoses, 1/pk
10453007 MD 050/0/18, connection: olive external dia. 9 to 11 mm, for pressure hoses, 1/pk
For GMP pressure filtration devices of the MD 142/6 series†
10453201 MD 142/2/11, connection: R 3/8", for SV 004, 1/pk
10453208 MD 142/2/14, connection: olive external dia. 9 to 11 mm, for pressure hoses, 1/pk
10453200 MD 142/2/09, connection: stainless steel clamp, for TriClover connectors, 1/pk
10453301 ST 002 stand for pressure filter, 1/pk
Pressure hoses
Pressure hose, braided, SV 003 a (connectors R 3/8"/SVK) and SV 003 b (connectors SVK/SVK), inner dia. 6 mm, length 1.5 m, 1/pk
10471100 Pressure hose, braided, SV 003 a and SV 003 b
10471101 Pressure hose, SV 003 c, loadable bar: 10, connection: rapid seal coupling/R 3/8", inner dia. 6 mm, length 1.5 m, 1/pk
10471200 Pressure hose, PTFE, SV 004, braided with stainless steel wire, loadable bar: 10, autoclavable to 121°C, connection: R 3/8" / R 3/8", inner dia. 8 mm, length 1.5 m, 1/pk
* All connections are suppplied with PTFE seal
† Connection to the device at safety collar for TriClover with clamp, supplied complete with sealing rings
SVK - rapid seal coupling

 

 

 

목록
PLUS
관리자 로그인
회원가입