In-line Filter Holder, Aluminum - Consumable

PLUS

제품소개

Consumable

[Filter Holder] In-line Filter Holder, Aluminum

관리자 2021-10-26 17:02:16

0 20

경량의 양극 처리된 aluminum filter holder

사용하기가 편리
In-line opening and closing capability 가 시간을 절약
필터는 입자분석을 위해 완전한 상태를 유지한다.
For liquid or gas filtration, or stack sampling.

Materials of Construction
Body (Three-part Housing): Anodized aluminum
Hose Barb Adapters: Polyethylene
Support Screen Underdrain Disc: Electropolished type 316 stainless steel
O-ring: Viton*
Thrust Ring: PTFE

Effective Filtration Area
9.6 cm²

Dimensions
Overall Length (excluding hose barbs): 5.7 cm (2.2 in.)
Diameter: 5.9 cm (2.3 in.)

Inlet/Outlet Connections
3/8 in. FNPT; hose barb adapters accept 6.4 mm (1/4 in.) ID tubing

Maximum Operating Temperature
Limited by filter type or by hose barb adapters 93 °C (199 °F)

Maximum Operating Pressure
14 bar (140 kPa, 200 psi)

Sterilization
Provided non-sterile; autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min

47 mm In-line Filter Holder, Aluminium
Part Number	Description	Pkg
1235	47 mm in-line aluminum	1/pkg
Replacement Parts
71242	Viton O-ring	1/pkg
71243	PTFE thrust ring	1/pkg
71735	Base, aluminum	1/pkg
71736	Collar cap, aluminum	1/pkg
71737	Inlet cover, aluminum	1/pkg
72970	Support screen, type 316 stainless steel	1/pkg
72971	Underdrain disc, type 316 stainless steel	1/pkg
73184	Hose barb adapter, polyethylene, 3/8 in. MNPT to 6.4 mm (1/4 in.) ID tubing	1/pkg
81377	Hose barb adapter, type 316 stainless steel, 3/8 in. MNPT to 6.4 mm (1/4 in.) ID tubing	1/pkg